How to Measure Curtains — Easy Guide

Measuring your window for curtains is simple — you only need a tape measure and two numbers: width and height.

Follow these 8 easy steps, then send your measurements to us on WhatsApp for your quote.

1. Get a tape measureAny normal inch-tape from a stationery or hardware shop works.

2. Measure the widthMeasure the window (or rod) from one end to the other, in inches.

3. Write the width downNote it immediately so you don't forget — e.g. 72 inches.

4. Measure the heightFrom the top (rod) down to where you want the curtain to end.

5. Decide the lengthFloor-touching, just below the sill, or full length — your choice.

6. Check the rodIf you have a rod or pipe, measure it too; if not, we sell and fit them.

7. Count your windowsRepeat for every window and note which room each belongs to.

8. Send on WhatsAppSend all measurements to +92 308 8116005 and get your quote.

Frequently asked questions

What if my measurements are slightly wrong?

Small differences are fine — we confirm everything before stitching. When in doubt, WhatsApp us a photo.

Should curtains touch the floor?

It's your choice — floor-touching looks rich; sill-length is practical. Tell us your preference.

How wide should curtains be?

Wider than the window, so they cover the sides and gather nicely. Our guide shows how.

Do I need a rod before measuring?

No — measure the window; we sell and fit rods and pipes too.

Can you measure at my home?

Start with a free consultation on WhatsApp — we'll guide you through it step by step.

Send your measurements or a photo — we reply with honest advice and your price.